Sodium alginate Chemische Eigenschaften,Einsatz,Produktion Methoden
R-Sätze Betriebsanweisung:
R36/37/38:Reizt die Augen, die Atmungsorgane und die Haut.
S-Sätze Betriebsanweisung:
S24/25:Berührung mit den Augen und der Haut vermeiden.
S36:DE: Bei der Arbeit geeignete Schutzkleidung tragen.
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
Beschreibung
Sodium alginate is the sodium form of alginate. Alginate is a
linear, anionic polysaccharide consisting of two form of 1, 4-linked
hexuronic acid residues, β-d-mannuronopyranosyl (M) and α-l-
guluronopyranosyl (G) residues. It can be arranged in the form of
blocks of repeating M residues (MM blocks), blocks of repeating G
residues (GG blocks), and blocks of mixed M and G residues (MG
blocks). Commercially available alginate currently originates from
algae. Alginate has wide applications. For example, one of its most
important role is being used as wound dressing materials for the
treatment of acute or chronic wounds. The use of alginate
crosslinking to make hydrogels for cell encapsulation is also quite
valuable. The emergence of various kinds of its derivatives recently
has further extended its application.
Chemische Eigenschaften
Colorless or slightly yellow solid occurring in filamentous, granular, and powdered forms. Forms a viscous colloidal solution with water; insoluble in alcohol, ether, and chloroform. Combustible. Sodium alginate is mixed with a solution or suspension of the biocatalysts and then dropped into a calcium chloride solution to form water-insoluble calcium alginate gels that immobilize enzymes, cellular organelles, or microbial cells.
Physikalische Eigenschaften
Sodium alginate occurs as an odorless and tasteless, white to pale yellowish-brown colored powder. insoluble in alcohol, ether or chloroform, etc. The aqueous solution of sodium alginate is stable at pH 4 to 10, and precipitates when pH < 3; hydrolysis occurs when pH > 10, and viscosity is lost at the same time.
Charakteristisch
Sodium alginate [9005-38-3] is extracted from seaweed and is a linear copolymer of β-dmannuronic acid and α-l-guluronic acid linked by 1,4-glycosidic bonds. It forms a gel in the presence of multivalent ions, usually calcium or aluminum. The controlled entrapment of cells is simple and generally nontoxic. Various cell types can be immobilized with negligible loss of viability. However, the matrix can be solubilized in the presence of Ca2+-chelating agents such as phosphate, citrate, or ethylenediaminetetraacetic acid. The alginate matrix is mechanically weak so that the growing cells (especially plant cells) can be released from, or even disintegrate, the beads. Another drawback of the alginate method for viable animal cells is the difficulty of producing sufficiently small beads to overcome oxygen limitation in their interior.
History
Sodium alginate is a natural polysaccharide product that was first described in a patent application by the British chemist Edward C C Stanford in 1881. To this day brown algae are still the main source used to extract sodium alginate from. This group includes many of the seaweeds, like kelps, found in chilly northern seas. In addition to the food industry, the gelling properties of sodium alginate have been used in medical, dental and cosmetic applications for years.
Verwenden
- Sodium alginate can be used as a flavorless gum. It is used by the foods industry to increase viscosity and as an emulsifier. It is also used in indigestion tablets and the preparation of dental impressions.
- Sodium alginate (NaAlg) and its modified forms have been widely used as membranes in pervaporation (PV) separation of aqueous‐organic solutions because of the hydrophilic nature and versatility to modify/tune their structures to achieve the desired separation.
- Sodium alginate is a polymer which can be extracted from brown seaweed and kelps. It is one of the structural polymers that help to build the cell walls of these plants. It has some unusual properties and a wide variety of uses.
The polymer can be represented like this:
When sodium alginate is put into a solution of calcium ions, the calcium ions replace the sodium ions in the polymer. Each calcium ion can attach to two of the polymer strands. This is called cross-linking and can be represented like this:
Application
Sodium Alginate is a gum obtained as a sodium salt of alginic acid, which is obtained from seaweed. it is coldand hot-water soluble, producing a range of viscosities. it forms irreversible gels with cal- cium salts or acids. it functions as a thickener, binder, and gelling agent in dessert gels, puddings, sauces, toppings, and edible films. In the manufacture of ice cream where it serves as a stabilizing colloid, insuring creamy texture and preventing the growth of ice crystals. In drilling muds; in coatings; in the flocculation of solids in water treatment; as sizing agent; thickener; emulsion stabilizer; suspending agent in soft drinks; in dental impression preparations. Pharmaceutic aid (suspending agent).
Vorbereitung Methode
Alginic acid is extracted from brown seaweed and is neutralized
with sodium bicarbonate to form sodium alginate.
Allgemeine Beschreibung
Alginic acid sodium is a gelling and nontoxic anionic polysaccharide. The carboxylic acid groups on the alginic acid chain, renders it insoluble in water.However, converting alginic acid to its sodium form, enables it to solubilize in water easily.
Sicherheitsprofil
Poison by intravenous and intraperitoneal routes. When heated to decomposition it emits toxic fumes of Na2O
Sicherheit(Safety)
Sodium alginate is widely used in cosmetics, food products, and
pharmaceutical formulations, such as tablets and topical products,
including wound dressings. It is generally regarded as a nontoxic
and nonirritant material, although excessive oral consumption may
be harmful. A study in five healthy male volunteers fed a daily
intake of 175 mg/kg body-weight of sodium alginate for 7 days,
followed by a daily intake of 200 mg/kg body-weight of sodium
alginate for a further 16 days, showed no significant adverse
effects.
TheWHOhas not specified an acceptable daily intake for alginic
acid and alginate salts as the levels used in food do not represent a
hazard to health.
Inhalation of alginate dust may be irritant and has been
associated with industrial-related asthma in workers involved in
alginate production. However, it appears that the cases of asthma
were linked to exposure to seaweed dust rather than pure alginate
dust.
LD50 (cat, IP): 0.25 g/kg
LD50 (mouse, IV): 0.2 g/kg
LD50 (rabbit, IV): 0.1 g/kg
LD50 (rat, IV): 1 g/kg
LD50 (rat, oral): >5 g/kg
Lager
Sodium alginate is a hygroscopic material, although it is stable if
stored at low relative humidities and a cool temperature.
Aqueous solutions of sodium alginate are most stable at pH
4–10. Below pH 3, alginic acid is precipitated. A 1% w/v aqueous
solution of sodium alginate exposed to differing temperatures had a
viscosity 60–80% of its original value after storage for 2 years.)
Solutions should not be stored in metal containers.
Sodium alginate solutions are susceptible on storage to microbial
spoilage, which may affect solution viscosity. Solutions are ideally sterilized using ethylene oxide, although filtration using a 0.45 mm
filter also has only a slight adverse effect on solution viscosity.
Heating sodium alginate solutions to temperatures above 70°C
causes depolymerization with a subsequent loss of viscosity.
Autoclaving of solutions can cause a decrease in viscosity, which
may vary depending upon the nature of any other substances
present. Gamma irradiation should not be used to sterilize
sodium alginate solutions since this process severely reduces
solution viscosity.
Preparations for external use may be preserved by the addition
of 0.1% chlorocresol, 0.1% chloroxylenol, or parabens. If the
medium is acidic, benzoic acid may also be used.
The bulk material should be stored in an airtight container in a
cool, dry place.
läuterung methode
Free it from heavy metal impurities by treatment with ion-exchange resins (Na+-form), or with a dilute solution of the sodium salt of EDTA. Alternatively dissolve it in 0.1M NaCl, centrifuge and fractionally precipitate it by gradual addition of EtOH or 4M NaCl. The resulting gels are centrifuged off, washed with aqueous EtOH or acetone, and dried under vacuum. [Büchner et al. J Chem Soc 3974 1961.] Sodium n-alkylsulfates. Recrystallise these salts from EtOH/Me2CO [Hashimoto & Thomas J Am Chem Soc 107 4655 1985].
Inkompatibilitäten
Sodium alginate is incompatible with acridine derivatives, crystal
violet, phenylmercuric acetate and nitrate, calcium salts, heavy
metals, and ethanol in concentrations greater than 5%. Low
concentrations of electrolytes cause an increase in viscosity but high
electrolyte concentrations cause salting-out of sodium alginate;
salting-out occurs if more than 4% of sodium chloride is present.
Regulatory Status
GRAS listed. Accepted in Europe for use as a food additive.
Included in the FDA Inactive Ingredients Database (oral suspensions
and tablets). Included as an excipient in nonparenteral
medicines (oral capsules, modified release tablets, enteric-coated
tablets and lozenges) licensed in the UK. Included in the Canadian
List of Acceptable Non-medicinal Ingredients.
Einzelnachweise
Pawar, Siddhesh N., and Kevin J. Edgar. Biomaterials 33.11 (2012): 3279-3305.
Yang, Ji-Sheng, Ying-Jian Xie, and Wen He. Carbohydrate polymers 84.1 (2011): 33-39.
Sodium alginate Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
